Parts by Type

print This page

Yoke Shafts

Filters: VEHICLE CLASS = LD,
PART NUMBER SERIES PART TYPE SPLINE COUNT SPLINE DIA. SPLINE LENGTH C/L TO END END TO RADIUS JOINT ANGLE BOOT NOTES VEHICLE CLASS BRAND
3R82-322 3R ISR 31/32 1.375 3.500 11.500 5.250 Like 3R82-321 but with long neck LD AAM
3R82-321 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Used on Auto Trac Transfer cases from 1998-2007.
Includes GM K-series 4x4s, Hummer H2 and GM-G Vans.
Boot also available, part N2112504. 		LD AAM
40137666 1410 OSR 32 1.378 9.055 40123472 external splined shaft transmission yoke LD AAM
40006885 3R ISR 32 1.375 3.350 7.810 5.910 N2112504, 3R18-321 Auto Trac Transfer LD AAM
N2-81-1181 1310 Flanged 32 1.378 3.500 0.000 6.380 3R18-321 PTI version is 3182-32. This part has a 2" Pilot and 3" BC. LD Neapco
NOE-12-2657-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
4.540" CL-CL 		LD Neapco
NOE-12-2658-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.54" CL-CL
 LD Neapco
NOE-12-5244-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
1.690" CL-CL
 LD Neapco
NOE-12-5122-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
8.02" CL-CL
AXLE DIAMETER .750		 LD Neapco
NOE-12-5139-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.49" CL-CL
AXLE DIAMETER .937		 LD Neapco
NOE-12-5147-A 1000 ISR N/A N/A N/A N/A N/A SOLID SHAFT WITH NO SLIP
7.650" CL-CL
AXLE DIAMETER .937		 LD Neapco
2682-800 7260 ISR 15 0.980 0.675 4.500 3.000 Fits Mercury outdrives LD PTI
1482-62 1451-22 OSR 16 1.063 3.000 6.385 4.250 Volvo LD PTI
3082-62 1300 OSR 16 1.375 3.650 7.310 5.750 3051-27 Volvo LD PTI
2682-801 7260 ISR 17 1.125 3.000 11.375 9.500 Fits Mercury outdrives LD PTI
3482-18 3451 OSR 18 1.470 5.125 8.500 6.000 This yoke shaft will not fit the OEM splined sleeve. Old PTI Sprinter style usage. LD PTI
1182-241 9951-22 Staked 24 0.972 1.693 5.130 3.272 N/A Infiniti Front Shafts, Staked joints LD PTI
1182-242 9951-22 Staked 24 0.972 1.575 4.461 3.265 N/A Infiniti Front Shafts LD PTI
1182-243S 1151-243 OSR 24 0.972 1.575 4.449 3.265 N/A Infiniti Front Shafts with snap rings LD PTI
1182-243L 1151-243 OSR 24 0.972 1.575 5.157 3.265 N/A Infiniti Front Shafts with snap rings, tip is pointed LD PTI
2182-272 1210 OSR 26/27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612, 2182-272M Can only be used with 26/27 sleeves, machined for clearance on CB. LD PTI
3182-272 1310 OSR 26/27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 Can only be used with 26/27 sleeves LD PTI
2182-27 1210 OSR 27 1.161 4.019 6.432 4.713 2716-497, 2715-285, 2714-612 BMW Yoke shaft LD PTI
2782-272 1751 OSR 27 1.147 1.181 3.375 1.875 BMW Front Shaft LD PTI
3182-271 1310 OSR 27 1.161 4.060 6.750 5.250 2716-497, 2715-285, 2714-612 LD PTI
2782-271 1751 OSR 27 1.147 1.181 2.750 1.300 BMW Front Shaft LD PTI
P3-82-1161 1350 29 1.175 1.750 5.531 3.062 20 Dana Discontinued. This is a PTI version. LD PTI
3182-311 1310 OSR 31 1.330 3.750 7.125 5.700 2718-628 1.378" (35mm) Bearing Surface LD PTI
3182-32 1310 CV 32 1.378 3.500 9.500 7.500 3R18-321 CV conversion for GM Auto Trac
Used on GM front shafts		 LD PTI
3182-322 1310 CV 32 1.378 3.500 10.250 5.875 GM Front Auto-Trac LD PTI
3-82-981 1350 Staked 10 1.500 1.500 5.820 0.000 LD Spicer
3-82-271 1480 OSR 10 2.250 1.594 4.380 2.812 7 LD Spicer
2-82-1731 1210 OSR 15/16 1.250 2.250 8.391 7.866 LD Spicer
10-82-21 1000 ISR 16 1.250 1.625 5.562 3.688 60 LD Spicer
1-82-21 1100 OSR 16 1.060 1.688 3.656 2.875 30 LD Spicer
2-82-211 1310 OSR 16 1.250 1.656 4.594 2.938 LD Spicer
2-82-51 1310 OSR 16 1.250 1.875 5.125 3.562 16 LD Spicer
2-82-41 1310 OSR 16 1.250 2.000 5.812 2.063 LD Spicer
2-82-11 1310 OSR 16 1.375 1.922 4.562 3.219 16 LD Spicer
2-82-641 1310 OSR 16 1.375 2.063 4.625 3.406 9 LD Spicer
2-82-21 1310 OSR 16 1.375 2.250 5.312 3.844 16 LD Spicer
2-82-58X 1310 OSR 16 1.375 2.500 7.062 5.190 LD Spicer
2-82-201X 1310 OSR 16 1.375 2.250 9.375 6.938 17 LD Spicer
2-82-861 1310 OSR 16 1.500 1.141 3.656 2.406 3 LD Spicer
3-82-971 1350 OSR 16 1.500 1.375 4.188 2.531 17 LD Spicer
3-82-71 1350 OSR 16 1.500 1.750 4.812 2.781 20 LD Spicer
3-82-61 1350 OSR 16 1.500 2.000 5.188 3.063 20 LD Spicer
3-82-1321 1350 OSR 16 1.500 2.000 5.844 3.781 LD Spicer
3-82-341 1350 OSR 16 1.500 2.000 6.406 4.344 20 LD Spicer
3-82-161 1350 OSR 16 1.500 2.500 6.531 4.406 9 LD Spicer
3-82-181 1350 OSR 16 1.500 2.500 6.812 4.688 9 LD Spicer
3-82-211 1350 OSR 16 1.500 2.500 7.250 5.125 9 LD Spicer
3-82-1191 1410 OSR 16 1.500 2.000 4.969 3.250 16 LD Spicer
3-82-1301 1410 OSR 16 1.500 2.000 5.406 3.312 LD Spicer
3-82-201 1410 OSR 16 1.500 2.500 6.312 4.470 16 LD Spicer
3-82-58X 1410 OSR 16 1.500 3.000 8.406 5.750 16 LD Spicer
3-82-268X 1410 OSR 16 1.500 3.000 8.969 6.281 LD Spicer
3-82-261 1410 OSR 16 1.750 1.438 4.547 2.672 9 LD Spicer
3-82-811 1410 OSR 16 1.750 1.438 5.406 3.531 9 LD Spicer
3-82-781 1410 OSR 16 1.750 3.000 6.340 4.410 LD Spicer
3-82-1121 1480 OSR 16 1.562 2.750 6.750 4.500 22 LD Spicer
4-82-601-2 1550 OSR 16 1.750 2.500 7.560 4.156 45 Active LD Spicer
4-82-601-1 1550 OSR 16 1.750 2.500 6.375 4.156 45 Inactive LD Spicer
4-82-371 1550 OSR 16 1.750 2.500 6.812 4.250 45 LD Spicer
4-82-411-7 1550 OSR 16 1.750 3.000 7.940 5.375 45 LD Spicer
4-82-411-1 1550 OSR 16 1.750 3.000 8.438 5.875 45 LD Spicer
4-82-401 1550 OSR 16 1.750 3.000 8.625 5.812 45 LD Spicer
4-82-561 1550 OSR 16 1.750 3.000 9.750 7.094 30 LD Spicer
4-82-211 1550 OSR 16 2.000 3.000 6.120 4.484 8 LD Spicer
4-82-191 1550 OSR 16 2.500 1.562 4.562 2.750 8 LD Spicer
4-82-201 1550 OSR 16 2.500 1.562 4.812 2.938 8 LD Spicer
4-82-621-1 1550 OSR 16 2.500 1.562 5.172 3.328 13 Active LD Spicer
4-82-621-3 1550 OSR 16 2.500 1.562 5.609 3.672 LD Spicer
4-82-621-4 1550 OSR 16 2.500 1.562 6.188 4.250 LD Spicer
4-82-621-2 1550 OSR 16 2.500 1.562 6.672 4.734 13 LD Spicer
2-82-1961 1330 OSR 23 3.000 4.140 8.250 5.550 mates with 2-55-278X sleeve, uses 212115X boot LD Spicer
2-82-871 1310 OSR 30 1.297 2.500 5.625 3.875 33 LD Spicer
3-82-1151-2 1350 OSR 30 1.302 2.219 6.590 5.430 LD Spicer